My setup

Since my Nighthawk died I'll be stripping the parts and putting them on a Krieger clone.  Until that time I'm flying a QAV210 clone

Frame: LS210
Motors: LeToday 2204 2300kv
ESCs: Littlebee 20a w/BLHeli (latest)
Props: 3 blade 5045 or Kingkong 5045
Flight controller (FC): SPRacingF3
Firmware: Betaflight (latest)
Power distribution (PDB): Lumenier 4Power
Battery: Turnigy nano-tech 4s 1800mah 35-70C OR Tattu 4s 1300m 75C
Receiver: FrSky D4R-II w/ upgraded firmware running PPM
Camera: HS1117
Video transmitter (vTX): Skyzone ts5823 6.8Ghz 200mW 32Ch
On screen display (OSD): OSDoge clone
Recording: Xiaomi Yi
Transmitter: Turnigy 9x w/ ER9X firmware and FrSky module
Goggles: Fatshark attitude 2 with 3d printed attachment + foam to replace eye cups

The Nighthawk is dead!
Frame: Nighthawk 280
Motors: Cobra 2204 1960Kv
ESCs: SN20 w/BLHeli 14.1
Props: Gemfan 5045 / also testing Gemfan 6030, KingKong 6040, 3 blade 5045
Flight controller (FC): CC3D
Firmware: Betaflight 2.1.3
Power distribution (PDB): Lumenier 4Power w/ 5v and 12/v stepdowns.  12V has LC filter
Battery: Turnigy nano-tech 4s 1800mah 35-70C OR Tattu 4s 1300m 75C
Receiver: FrSky D4R-II w/ upgraded firmware running PPM
Camera: Sony 700tvl board camera
Video transmitter (vTX): Skyzone ts5823 6.8Ghz 200mW 32Ch
On screen display (OSD): MinimOSD w/ Team KV Mod
Recording: Xiaomi Yi
Transmitter: Turnigy 9x w/ ER9X firmware and FrSky module
Goggles: Fatshark attitude 2 with 3d printed attachment + foam to replace eye cups

PID (Roll, Pitch, Yaw) - Still working on these.
     P: 6, 7, 10
     I: 0.35, 0.40, 0.45
     D: 10, 10, 5